Netgear Nighthawk Extender models are quiet popular. They do have made our lives easier by providing super-fast internet connection in every corner of the premises. Flashing of this Orange light on the Nighthawk Netgear Extender depicts that the device is booting. Orange light on the Nighthawk Netgear Extender is an area of concern, so let’s discuss about the causes and the fixes.
Reasoning: Orange Light on Netgear Extender:
If this issue is giving you a hard time, then just go through the probable reasons of occurrence:
- Issue with the Netgear Extender set up.
- Firmware is not updated.
- Unstable connection of Ethernet cable with the router and the extender.
- Booting issue with the device.
- Interruption in the WiFi signals of the Extender.
So, these are some basic reasons behind the flashing orange light on the Netgear Nighthawk Extender. Now, we get to know about the causes, let’s see how we can fix the issues.
How We Can Rectify the Problem:
Reboot your Netgear Nighthawk Extender: This will help to rectify the temporary glitches in the system. You can perform it by following below mentioned steps:
- First of all, power off the extender and unplug it from the power outlet.
- Wait for five minutes, plug it in again into the power socket and switch it on.
Update Netgear Firmware: This is very essential to update the firmware of your device to the latest version; this can also resolve the orange light issue.
- You need to have an updated version of internet browser on your device.
- Search for www.mywifiext.net then look for new extender setup page.
- Go to Settings > Select Maintenance and click on Firmware update.
- Follow the instructions further.
Check the Ethernet Connection: Make sure that the Ethernet cable connected with the router and the extender is in good shape. Wear and tear in the cable can be the reason of interruption in the network. This might be the reason of flashing orange light on the power LED of Netgear extender.
Reset Netgear Nighthawk Extender: If nothing works, you can perform factory default reset. It can be done easily:
- First, look for the reset button on the extender.
- Once found, do press it with the help of a clip or pin, hold it for few seconds.
As resetting process of extender is complete, connect your WiFi enabled device with the extender network. Choose default network Netgear_Ext network on WiFi selection display.
Other measures which should be practices while setting up the device to curb the orange light issue:
- Extender should always be located within the network coverage of network router. For exact placement tips you can refer mynetgear portal.
- Be mindful in keeping the Netgear extender and the router away from devices which emit radio waves. Such as microwave oven, radio, refrigerator, Bluetooth speakers or cordless phones etc.
- Should never place the Netgear Nighthawk extender in corners. Thick walls, large furniture and water tanks can be the source of network interruption.
That was all about the probable causes of orange light on the Netgear Nighthawk Extender. Hope the troubleshooting steps will help to resolve the problem effectively.