How to Set Static IP For Netgear Repeater?

How to Set Static IP For Netgear Repeater?

Every time you connect the Netgear repeater and host router, the extender gets a new IP. It is often regarded as a dynamic IP address. Why? Well, because the IP changes every time the connection between the devices is established. Hence, the chances of having poor connectivity increase because of dynamic IP. However, you can reduce the hassle when you set static IP for the Netgear extender.

The question arises – how to set static IP for the Netgear repeater? What is the right procedure? If you have been searching for answers to all such questions, you have been on the right track. This post will give you a deeper insight into how to set static IP for a repeater. Let’s proceed further.

Steps to Set Static IP on Netgear Repeater

Connect Repeater-Router

Let us form a solid connection between the Netgear repeater and the host router. For that, our recommendation is to form an Ethernet cable connection. The cable must fit tightly fit into the router and repeater ports. For the best experience, you should avoid using a wireless connection.

Apart from that, you should ensure there are no deep cuts on the cable used. If a wireless connection is the only option, the distance between the devices should be optimal. Otherwise, you will have an unstable internet connection that won’t permit you to set static IP.

Open PC

It is time to power on a PC. You can also use a laptop in case you don’t have access to a computer. Choose a power cord to turn on your computer. Furthermore, you should get access to a perfectly working power socket.

Plug in your computer and don’t forget to press the start button. To have a seamless experience, you should update the software version of your computer or laptop. It helps you bypass any errors and resolve compatibility issues with different websites.

Launch Browser

After turning on your PC, you have to launch a web browser to set static IP for your Netgear device. You can choose any browser available at your disposal. However, the minimum requirement is that it should have the latest software version.

Apart from that, it should be compatible with the repeater website. For instance, if you want to access the Netgear EX3700 setup wizard, the default URL should open on the chosen internet browser. If it is not compatible with your browser, accessing the wireless settings won’t be possible.

Access Default Web Address

As told above, the next step is accessing the default web address of your Netgear repeater. But, to do so, there are a few conditions that you must fulfill. If you don’t do as said, you might face can’t access the URL issue.

The first thing is that you should enter the web address in the address bar only. Under no condition, the URL should go in the search bar. Moreover, the typing errors should be mended before hitting the Enter key. Doing so helps you get access to the repeater login page.

Do Login

You get access to the Netgear extender login page. Hence, you are just one step away from accessing the extender setup wizard. You require repeater login credentials to get past the login page. Therefore, you must get hold of the login ID and passphrase.

Entering the correct user ID and passphrase is crucial. Without it, you will face errors while logging into your range extender. To minimize further errors and set static IP, turn off the Caps Lock key. Click Log -Iin once you are done entering the login details.

Open Setup > IP Address Setup

After having access to the Netgear range extender setup wizard, move to the Setup option. From there, hop onto the IP Address Setup tab. Click the Use Static IP option. That is where you get different options.

  • IP Address
  • IP Subnet Mask
  • Gateway IP Address
  • Primary DNS

Click Apply

After entering the required information, click the Apply button. It saves the changes that were made on the Netgear extender dashboard. You might have to restart your repeater. If asked, do so.

Conclusion

In case you are using an iOS device to access the repeater dashboard, open mywifiext.local page. That is where you will access the repeater setup wizard and get to set a static IP address. In case you feel stuck or struggle to get the required results, consult with our tech experts for further assistance.