A WPS client is a computer or any other wireless device. WPS lets one add a wireless client device to the network of the Netgear range extender without having to type the WiFi password. In case you own a Netgear wireless extender, then you can gain the advantage of connecting to the network wirelessly. Wondering how you can Netgear add WPS client? Well, for that, you ought to pay attention to the steps given in this blog. Before reading further, you should know that the steps below are not written in the context of a particular extender model. This means that whether you want to perform Netgear EX3700 setup or install any other extender, the steps can be implemented for all models.
What is Needed Prior to Adding a WPS Client?
Whether it is about wanting to Netgear add WPS client on the range extender or enabling any feature, there are a couple of prerequisites that users need to take care of, including you. With that said, the following are the things that you should ensure.
1. Uninterrupted Power Supply
In order to execute any process, the foremost thing that is needed is an adequate power supply. If this particular norm is not met, then no matter how many precautions you take, they will go to waste. Thus, make sure that your Netgear extender is properly connected to an electrical socket, a non-damaged one to be precise. Apart from this, the electrical socket should not be short-circuited.
2. Connected Networking Devices
Another thing that is needed to Netgear add WPS client is a stable connection between the extender and the router. This is only possible if the connection between them is established with the assistance of an Ethernet cable. Just make sure that the cable is tightly connected to the ports located on the devices, i.e. extender and router. Also, see to it that you keep your pet away from chewing or biting the cable.
How to Netgear Add WPS Client on Range Extender?
Access an Updated Web Browser
- Get your hands on the charger of your device, i.e. computer or laptop.
- Connect one end of the charger to the device and another to the wall socket.
- Switch on the button located on the electrical board and turn on your device.
- Load an updated internet browser.
- Also, ensure that the browser is free from browsing history.
The process to update and clean a browser varies from browser to browser. In simple words, if you are using Google Chrome, the process will be different, and the same goes for Mozilla Firefox, Microsoft Edge, Apple Safari, and Opera.
Enter the Extender Web Address
- Go to the address bar also known as the URL field.
- Enter the web address of your Netgear wireless range extender.
- The web address of your extender is mywifiext.net.
- Press the Enter key located on the keyboard.
- For your information, you can also use the IP if the web address does not work.
Input the Admin Login Details
- Pressing the Enter key will take you to the next window, i.e. the login window.
- Insert ADMIN for username and type the password.
- In case you have not personalized the password, type PASSWORD for the password.
Considering the username and password of your Netgear extender are case-sensitive, keep the CAPS LOCK key on your keyboard OFF while you are entering them. Otherwise, you will not be able to Netgear add WPS client.
Select the Add WPS Client Option
- On the next window, select the NETGEAR ADD WPS CLIENT option and hit NEXT.
- Now, you are required to select a setup method.
PUSH BUTTON: Click the WPS button which you find on the screen.
PIN NUMBER: Insert the client security PIN and click the NEXT button.
In a minute or two, you need to go to the client device and use its WPS software to connect to the WiFi network of the Netgear wireless range extender.
The WPS process will by default set up the device to the network password when it is connected. You will get a confirmation message on the screen for the same.
In Conclusion
In a time when more than three-fourths of the population has shifted to connecting devices wirelessly, it is only obvious for them to want to Netgear add WPS client on the WiFi range extender rather than making a connection with a wire. Considering you are standing in the queue, we hope that after following the step-by-step guidelines mentioned above, you will easily be able to add the WPS client to the range extender. In case, you are interested in gaining knowledge regarding similar topics and enabling new features, stop by this website often. Here, you will find blogs related to the latest features and hot topics of Netgear extenders. With that said, we are signing off.