Every Netgear extender model has various LED lights located on it. Each LED is labeled as per the function of its button. For example, for power, the LED is labeled POWER, for internet connection, it is WIFI, for WPS connection, it is WPS, and so on. There are a couple of lights that are supposed to be turned on at all costs on the wireless range extenders, including power and internet. However, is the Netgear extender only one light on? Well, that is troublesome. But, let us focus on the good, i.e. troubleshooting the issue at hand. The same can be done if you carefully read the solutions discussed in this post.
Why is Netgear Extender Only One Light On?
There can be more than a couple of reasons why you are experiencing the Netgear extender only one light on issue. For example, an interrupted power supply, technical glitches, weak Ethernet connection, outdated firmware, or an impartial extender setup are some factors that could have caused the issue.
To troubleshoot it, waste no more time and get down to reading the troubleshooting solutions mentioned further in this guide. By the way, the first solution can also help one resolve the www.mywifiext.net refused to connect issue.
How to Turn On Remaining Netgear Extender Lights?
1. Your Extender Needs a New Start
As mentioned in the last segment of this blog post, one of the reasons why the Netgear extender only one light on issue is following you around is because of technical glitches. Their existence is a sign that your device needs a fresh start.
To give the extender the start that it needs, it is recommended that you read these steps:
- Hit the power button on the extender to turn it off and unplug it.
- Hold on for some time, approximately 5 minutes.
- Plug the extender back in and turn it on.
- The same can be done if you press the power button on it again.
Now, see if a maximum number of lights on your Netgear extender have turned on. By any chance, if this is not true for you, then you ought to read the next solution.
2. Use the Other Source or Medium
Sometimes, using a wireless source of connection to connect the Netgear extender to the host router can make the connection weak thereby stopping the LED on your device from even displaying a color let alone getting stable.
Considering this, you need to use another source to join the networking devices. To be specific, you should use an Ethernet cable. For this, connect one end of the cable to the extender and another to the router, and ensure that you are doing so tightly.
By any chance, if the connection is left loose, then you can forget about moving past the Netgear extender only one light on issue and enjoying a blazing-fast internet connection on your client device. Thus, do as necessary.
3. Press the Reset Button on Extender
Resetting the Netgear wireless range extender is the ultimate hack when everything else refuses to work for the user. Considering you are reading this section, we are assuming that nothing worked for you as well.
So, why waste time? Why don’t you grab this opportunity and reset or restore your device to its default factory settings? Well, you can do so by pressing the reset button on your extender. Make sure that after doing so, the LED becomes stable.
See to it that right after you are done resetting your device, it gets reinstalled by you. Whether you are interested in doing Netgear EX3700 setup or Netgear AC1200 setup, referring to the steps given in the manual will be great.
There you will learn that there is not just one method to set up your device, but three in total. Finding it hard to believe us? Well, refer to the manual and see for yourself.
To Conclude
We are signing off with the hope that you will be able to resolve the Netgear extender only one light on issue after following the troubleshooting tips mentioned in this blog post. On the off chance, you are experiencing the same issue; we are freely assuming that something is wrong with your extender itself.
To get rid of the issue, you should get your hands on a replaced version of the existing networking device. In case you are not aware, then know that replacing the device is only possible if it is under warranty. Otherwise, get ready to buy a new model.