Getting red light error on your Netgear extender? Waited enough for the LED light on your device to turn green, but no results? Well if your Netgear extender red light keeps blinking and is not turning green, it means your extender has been caught by some issue. For fixing this, you need to follow certain troubleshooting tips. This blog sums up various tips and tricks to fix the Netgear extender red light issue. However, before you start following the hacks, make sure your extender’s hardware is not damaged.
Let’s Fix Netgear Extender Red Light Issue
Turn the Extender Off and Back On
If your extender keeps on showing a red light and you are unable to get the issue fixed, consider turning your device off and on again. This basically is known as the reboot process. With the help of this process, certain software and hardware-related glitches can be fixed. Thus, you may give a halt to the Netgear extender red light issue.
Give Your Extender Some Air
Perhaps, due to overheating issue, the LEDs on your extender are not turning green. To nail down the problem, consider giving your extender an airy space. While relocating the device, make sure it is within the network range of your WiFi router and is connected to your system through Netgear_ext.
Check for WiFi Interference
Placing your extender close to things/appliances emitting electromagnetic waves can not only wrack up the performance of your device but also take you into the mess of Netgear extender red light issue. So, keep in mind to locate your extender far from Bluetooth speakers, baby monitors, fish tanks, reflexive surfaces, aluminum studs, cellular phones, concrete walls, etc.
Replace the Ethernet Cable
At times, it has been found that replacing the Ethernet cable used for connecting your router can also help when it comes to fixing the red light issue on a Netgear WiFi range extender. Possibly, there are some cuts in the cable you are currently using, resulting in the red light issue.
Update the Firmware
A firmware update helps in upgrading your extender with new features and various bug fixes. It makes your device work better and faster without any fault. By installing a firmware update on your extender, you may get rid of the red light issue. So, consider getting it by navigating to the official site of Netgear as per the model number of your extender.
Reset Your Extender
The last resort you can try to fix the Netgear extender red light issue is to reset your device to the default factory settings. This will erase all the personalized settings on your device and take it back to the default state. Once done, set up your device again using the default web address that matches with the OS of your device. For starters, mywifiext.net supports Windows OS while mywifiext.local is for iOS and MAC devices.
Note: For certain extender models like the Netgear EX2700 setup, a special reset is needed if the LED light on it is blinking red continuously. This could be a model-specific issue. For getting it resolved, it’s better you contact tech support experts to do away with the issue.
Though the Netgear extender red light is troublesome, yet it can be fixed by implementing a few troubleshooting tips. This post has analyzed various possible ways for fixing the red light error on your Netgear WiFi range extender. It is expected that after using the tricks, you will be able to turn the LED light on your extender from red to green and fix the problem in a hassle-free manner
Well, for any doubts or queries regarding fixing Netgear extender red light issue, you can anytime reach out to us. You are also welcome to share your thoughts on the write-up and fixes given in it.