Why is Netgear WiFi Extender Only Power Light On?

Netgear WiFi Extender Only Power Light On

Do you see only the Power LED on your Netgear WiFi extender and no other light is lit? Well, the reason for this could be a glitch, outdated firmware or wrong configurations on the extender. But what to do in such a case? Find in this blog an easy-to-follow workaround for Netgear WiFi extender only power light on situation. Let’s start.

Netgear Extender Only Power Light is On: Fixed

The ultimate fix for this problem is the Netgear WiFi extender reset. However, we suggest you try the reboot process first. This will help you eliminate any technical glitches from the device.

How to Reboot Netgear WiFi Extender?

  • Use the Power On/Off button on the extender and turn it off.
  • Unplug the power cord from the wall outlet.
  • If there’s any other cable attached to the extender, remove that as well.
  • Let the extender stay idle.
  • You can wait for as long as you can. We suggest you keep it idle for at least 5 minutes.
  • After that, reinsert the cables.
  • Plug in the extender.
  • Toggle the Power On/Off button to the On position.

Let the extender completely power on. Do you still find only the Power LED on and all other LEDs are off? Go for the ultimate fix now.

Reset Netgear WiFi Extender

Now that the reboot process hasn’t been of any help, the problem could be due to corrupted firmware or misconfigurations. This can only be resolved by resetting the extender and wiping off the personalized data from it. To do that, you should perform a factory reset and again perform the New extender setup. The steps for the reset process have been presented below:

  • Find the indented button on the extender with the label Reset or Factory Reset. You can find it at the rear, below or side panel of the extender.
  • Insert a sharp object inside the pinhole to press the button.
  • Hold the button with the object for about 7 to 15 seconds.
  • Release the button and wait for some time.
  • The extender will reboot after the reset process is completed.


This erases all the customized settings from the extender. The factory defaults are restored on it making it as good as a new one. You should see all other LEDs lit now.

After the reset process, you need to give a fresh start to your Netgear WiFi extender. With that said, we suggest you to reconfigure the extender. A Netgear WiFi extender can be configured using the mywifiext web interface, WPS setup method or using the Nighthawk app. You can select any of these methods as per your liking.

Final Thoughts

If you find Netgear WiFi extender only power light on then taking assistance from the solutions discussed in this guide should be helpful to you. After rebooting or resetting the WiFi extender it should be up and working as intended. We expect that you can now connect to lag-free internet from your Netgear WiFi extender.